Trilithic EASy-PLUS, Operation Manual

Page: 92 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
90
3. Use The ATT 960 Hz Amplitude control to set the relative volume of the 960 Hz
tone that is part of the EAS dual-tone (attention tone). The default setting is 28.
4. Use the FSK 1562.5 Hz Amplitude control to set the relative volume of the EAS
“space” tone that is used to transmit EAS FSK data. The default setting is 48.
5. Use the FSK 2083.3 Hz Amplitude control to set the relative volume of the EAS
“mark” tone that is used to transmit EAS FSK data. The default setting is 48.
6. Click the Program Settings button to program the audio
configuration parameters to the EASyPLUS.
The Audio Tone Calibration group is used to generate the tones used
in EAS. It allows the tones to be played individually, or combined to create specific EAS
tones.
7. Use the
Select Audio Tone
pull-down list to select which of the tones to play.
8. Click the Play Tone button to start the tone. When the audio tone begins playing,
the
Play Tone
button will change to a
Stop
button. Click the
Stop
button to end the
audio tone playback.
9. Select the
Activate Audio Switches During Playback
check box to trigger the
encoder/decoder’s audio switch while the tone is being played. If normal program
audio is connected to the audio switch input, the input will be cut off and replaced
with the audio tone.
10. Click the Close button to return to the normal Utilities tab.