Trilithic EASy-PLUS Operation Manual Download Page 64

Page: 64 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09

11. Click the

Locations

button to select the location that will cause

this device to be activated.

12. In the S

elect All Serviced

Locations & Users

window,

select counties that the device

serves, as well as the users the

device serves.

This option will allow each device

to serve a different geographical

location, and to prevent

unnecessary interruption if the

message is not intended for the

location serviced.

13. Select the

Enable All Locations

check box to disable location

routing and send all messages to

the device.

14. Click the

button to accept the configuration.

15. Click the

button to save the configuration changes.

Summary of Contents for EASy-PLUS



















































































































Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands

Trilithic EASy-PLUS, Operation Manual

Search results

Summary of Contents for EASy-PLUS

Reviews:

Related manuals for EASy-PLUS

Brands by name

Popular brands