Trilithic EASy-PLUS, Operation Manual

Page: 63 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
61
Adding a DNCS/Evertz/Middleware Device
To add a DNCS, Evertz, DCM, or Middleware server to the list of devices, perform the
following procedure.
1. To add a device to the list, click the Add button.
2. In the pop-up
DNCS/Evertz/
Middleware Settings window, select
the communication protocol from the
Protocol Type pull-down list. If an
option cannot be edited, it has been
set to the only value allowed by the
Protocol Type selection.
3. Enter a name in the
Name
text box.
4. Enter the IP Address .
5. Enter the TCP Port number used (the
default setting is 4098 ).
6. Enter the FTP Username .
7. Enter the FTP Password .
8. If the iTV Manager protocol is used, enter
a number to identify the EASyPLUS in the
Token control box. The token number
helps the EAC distinguish between multiple
encoder/decoders.
9. If the Use the EAS Duration check box is not selected, a value of zero will be
sent.
10. Select the Include Text File with an EAN check box to transfer the text file
containing the EAS crawl text via FTP, prior to initiating the EAN.
11. Select the Disable EOM Abort Messages check box to prevent EASyPLUS from
sending an EOM when the abort button is pressed. Using the EOM as an abort
message is not an official part of the specification and may not be supported by
all devices.