Trilithic EASy-PLUS, Operation Manual

Page: 70 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
68
33. After selecting the descriptor
type, the correct settings will
be provided. Edit the descriptor
settings and then click the OK
button to save the configuration
changes.
34. A custom descriptor type is
provided to enter descriptors not
defined or supported in the GUI.
When entering a custom descriptor
you must enter the raw binary data
that goes into the descriptor. The
data is entered as hexadecimal
values. All of the descriptor data,
including the descriptor_tag
and descriptor_length, must be
included.
35. To edit a descriptor, select a
descriptor to edit from the SCTE-
18 Descriptors pull-down list and
then click the
Edit
button. Edit
the settings and then click the OK
button to save the configuration
changes.
36. To delete a descriptor, select
a descriptor to delete from the
SCTE-18 Descriptors pull-down
list and then click the
Edit
button.
Change the descriptor type to
“None, do not include (or remove
existing) descriptor” and then click
the OK button.
37. Click the Accept button to complete the process.