Transition Networks S4224 Web User Manual Download Page 589

Page: 589 / 669

Transition Networks

S4224 Web User Guide

33558 Rev. C

https://www.transition.com

Page 589 of 669

Message

Invalid Firmware Image - The uploaded firmware image is invalid. Please use a correct

firmware image.

Meaning

: At

Maintenance

Software

Upload

you clicked the

Upload

button without first browsing

to and selecting a valid S4224 firmware filename.

Recovery

1. Click the browser

Back

button to return to the Firmware Update page.

2. Browse to and select a valid file to use for this upgrade (e.g.,

S4224-v1.0.1.dat

3. At the ‘Choose File to Upload’ dialog box, click the

Open

button.

4. Click the

Upload

button.

5. At the web page message, select

Cancel

6. The upgrade will proceed, or the message "

Firmware Upload Error - Flash is already updated with

this image

" will display.

7. Refer to the “

Software Upload Procedure

” on page

537

Message

Firmware Upload Error - Flash is already updated with this image

Meaning

: You tried to update the S4224 with the current (existing) firmware version.

Recovery

1. Click the browser

Back

button to return to the Firmware Update page.

2. Browse to and select a valid file to use for this upgrade (e.g.,

S4224-v1.0.1.dat

3. At the ‘Choose File to Upload’ dialog box, click the

Open

button.

4. Click the

Upload

button.

5. At the web page message, select

Cancel

6. The upgrade will proceed, or the message "

Firmware Upload Error - Flash is already updated with

this image

" will display.

7. Refer to the “

Software Upload Procedure

” on page

537

Message

Warning! Device will automatically reboot. Proceed with update now?

Meaning

: Information message indicating that you initiated a firmware update from the

Maintenance

Software

Upload

menu path. This procedure transfers the uploaded firmware image to the S4224 flash

component. The S4224 will restart after the update.

Note

: do not reset or power off the S4224 during this

process.

Recovery

1. Verify that you want to perform this firmware update and resultant reboot and click

. Otherwise

click

Cancel

2. Refer to the “

Software Upload Procedure

” on page

537

Problem

: The message “

System restart in progress - The system is now restarting. - Polling...

” displays

continuously without completing.

Meaning

: At

Maintenance

Restart

Device

Are you sure you want to perform a Restart?

prompt, you

selected

Yes

with the

Force Cool Restart

checkbox checked.

Recovery

1. Press the keyboard

Esc

key.

2. Press the browser

Back

button.

3. Log out and then log back in to the S4224.

4. Log out of the S4224, close the browser session, and then log back in to the S4224.

5. Restart the S4224 from the

Maintenance

Restart

Device

menu path.

Summary of Contents for S4224






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S4224

Reviews:

Brands by name

Popular brands

Transition Networks S4224, Web User Manual

Search results

Summary of Contents for S4224

Reviews:

Brands by name

Popular brands