Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 127 of 669
IP Source Guard >
Static Table
The default Static IP Source Guard Table displays no saved entries. When you click the
Add New Entry
button, initial entry fields display.
The Static IP Source Guard Table parameters are described below.
Delete
Check to delete an existing entry. It will be deleted during the next save.
Port
The logical port for the settings. Select a port from the dropdown.
VLAN ID
Enter the VLAN ID for the settings.
IP Address
Enter the allowed Source IP address (e.g., enter
192.168.1.30
).
IP Mask
The IP Mask can be used for calculating the allowed network with IP address. A valid IP Mask is a
dotted decimal string (‘x.y.z.w’), where 1) x, y, and z are decimal numbers between 0 and 255, 2)
when converted to a 32-bit binary string and read from left to right, all bits following the first zero must
also be zero.
Add New Entry
Click the
Add New Entry
button to add a new entry to the ‘Static IP Source Guard’ table. Specify the
Port, VLAN ID, IP address, and IP Mask for the new entry. Click the
Save
button when done.
Buttons
Save
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
