Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 242 of 669
Add a New Peer MEP Procedure
A maximum of 5 Peer MEPs can be added to an instance by clicking
the Add New Peer MEP
button at
Configuration
>
MEP
. Only one peer MEP can be added per Save operation.
1.
Navigate to the
Configuration
>
MEP
menu path. See “
” on page
2.
Select a MEP Instance to configure (e.g., click on the
2
in the
Instance
column above). The MEP
Configuration page for MEP Instance 2 displays.
3.
In the “Peer MEP Configuration” section, click the
Add New Peer MEP
button. An entry
table
displays
below the message “
No Peer MEP Added.
”.
4.
Enter a
unique
Peer MEP ID
for the new peer MEP (you cannot enter duplicate MEP IDs).
5.
Enter a
Unicast Peer MAC
address for the new peer MEP (this must be a unicast address).
6.
Click the
Save
button.
7.
Repeat steps 2-6 for each new peer MEP to be added.
