Transition Networks S4224, Web User Manual

Page: 586 / 669

Transition Networks S4224 Web User Guide
33558 Rev. C https://www.transition.com Page 586 of 669
Message
: Peer MEP ID
x
is already in use
Meaning
: At the Configuration > MEP > MEP Configuration menu path you tried to add a new peer
MEP with an existing Peer MEP ID.
Recovery
:
1. Click the OK button to close the webpage message.
2. Enter a new Peer MEP ID and click the Save button.
3. See the related section of the manual.
Message
:
The user name contains illegal characters Please use a combination of letters, numbers
and underscores.
Meaning
: At Configuration > Security > Switch > Users you entered an unacceptable character in the
User Name field.
Recovery
:
1. Click the OK button to clear the webpage message.
2. Enter a new User Name without any spaces or other illegal characters and click the Save button.
4. See the “ Add a New User ” section on page 50.
Message
: Entry with VLAN ID:
x
and MAC Address
xx-xx-xx-xx-xx-xx
already in MAC table.
Meaning
: At the Configuration > MAC Table > Static MAC Table Configuration menu path, you
tried to add a new static entry with a VLAN ID and MAC address that was already used.
Recovery
:
1. Click the OK button to clear the webpage message.
2. Enter a new static entry with a VLAN ID and MAC Address that is not already used.
3. Click the Save button.
4. See “ MAC Address Table Configuration ” on page 260 .
Problem
: Management Port EtherType 9100 does not function
Meaning
: When Management Port Ethertype Customer S-port is set to 9100, S4224 access via the
MGMT port is lost. This is a known issue with a fix in process, available at the next S4224 version
release.
Recovery
:
1. Make sure you are running the latest version of S4224 software; upgrade if a newer version is
available.
2. If possible, use the S4224 CONSOLE PORT.
3. If possible, use Ethertype 88A8 or 8100. See the “ Ports ” description on page 225 .
4. Verify the APS and MEP configurations.
5. Retry the operation.