manualshive.com logo in svg

Transition Networks S4224, Web User Manual

Share
Download
Transition Networks S4224 Web User Manual Download Page 615

33558 Rev. C 

https://www.transition.com 

Page 615 of 669 

Appendix C:  Application Notes 

S4224 Applications Support 

The S4224 offers an unmatched level of Service Edge and Carrier Ethernet Networking features.  
It provides a rich set of Carrier Ethernet switching features such as MEF Ethernet services, provider 

bridging, protection switching, OAM, and Synchronous Ethernet.  
The S4224 offers an unmatched level of Service Edge and Carrier Ethernet Networking features, and 

achieves wirespeed performance for even the most feature-rich Carrier Ethernet (CE) services.  
The TN S4224 is an excellent choice for Mobile backhaul and for service provider demarcation points in 

Edge and Access devices 
Key S4224 features include:  

  MEF UNI and NNI functionality 

  Hardware-based Ethernet OAM, performance monitoring, and service activation measurement 

(SAM) 

  Network demarcation 

  Service protection (linear, ring) 

S4224 applications include:  

  Wireless and mobile backhaul (small cell)  

  Ethernet demarcation 

Available TN S4224 Application Notes 

Application notes on certain specific functions / environments are available from your TN Technical 

Support specialist. Topics include: 

 

1.  Service OAM (SOAM) 

2.  Ethernet Services 

3.  QoS (Quality of Service) 

4.  L2 Protocols (LACP/LAG/MAC/VLAN/Mirroring/Remote Mirroring 

 

Not Intended for Use in Life Support Products

: S4224 products are not intended for use in life support 

products, systems, or environments where failure of an S4224 product could reasonably be expected to 

result in death or personal injury. Anyone using an S4224 product in such an application without express 

written consent of an officer of Transition Networks, Inc. does so at their own risk, and agrees to fully 

indemnify Transition Networks, Inc. for any damages that may result from such use or sale.

 

  

Summary of Contents for S4224






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands