Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 153 of 669
Detailed Link OAM Status
After a ‘Save’, at the
Link OAM Port Configuration
page, click on a linked Port number in the “Port”
column to display that particular port’s “Detailed Link OAM Status’ information.
This page provides Link OAM configuration operational status. The displayed fields show the active
configuration status for the selected port.
The fields are described below.
PDU Permission
Displays the port’s current level of PDU permissions (e.g.,
Info exchange
,
Receive only
).
Discovery State
Displays the port’s current state of discovery (e.g.
,
Active state
,
Fault state
).
Peer MAC Address
Displays the peer’s MAC address or
“
------
“ if no peer is available.
Local and Peer
Mode
The Mode in which the Link OAM is operating;
Active
or
Passive
.
Unidirectional Operation Support
This feature is not user configurable. The status of this configuration is retrieved from the PHY (e.g.,
Disabled
or
Disabled
).
Remote Loopback Support
If status is enabled, DTE is capable of OAM remote loopback mode (e.g.,
Disabled
or
Disabled
).
Link Monitoring Support
If status is enabled, DTE supports interpreting Link Events (e.g.,
Disabled
or
Disabled
).
MIB Retrieval Support
If status is enabled, DTE supports sending Variable Response OAMPDUs (e.g.,
Disabled
or
Disabled
).
