Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 370 of 669
Service Activation Configuration
The
Configuration
>
Service
Activation
menu path lets you configure Service
Activation System Settings, Profiles, and Tests.
Service Activation Configuration
Configuration > Service Activation > System
Navigate to the
Configuration
>
Service
Activation
>
System
menu path to display the Service
Activation (SA) System Settings.
The settings are described below.
Collector state
The Collector Flag enables or disables the SA module’s ability to accept SA test requests from
outside. The default is Disabled. The Collector Flag determines if the SA module accept SA test
requests from outside.
Peer communication protocol state
Enable/disable the peer communication protocol. If this attribute is disabled, a NID is unable to
support unidirectional and bidirectional RFC2544 tests (both as Initiator and Collector) since it
cannot communicate with the far end. Only loopback tests can be executed in this case.
Test MAC address
. The Test MAC Address is used as the source MAC address of the generating frames.
Buttons
Auto-refresh
: Check this box to refresh the page automatically every three seconds.
Refresh
: Click to refresh the page; any changes made locally will be undone.
Save
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
