Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 569 of 669
Message
:
The parameter of ‘port_copy’ can’t be set when action is permitted
Meaning
: At
Configuration
>
Security
>
Network
>
ACL
>
Ports
you set the “Action” parameter to
“Permit”, which does not allow the “Port Copy” parameter to be set to a Port (
Port 3
on the screen
above).
Recovery
:
1. Click the
OK
button to close the webpage message.
2. Either a) change the “Action” parameter selection, or b) change the “Port Copy” parameter selection to
“Disabled”.
3. Click the
Save
button when done.
4. If a problem persists, contact TN Tech Support.
Message
:
The parameter of ‘Port Redirect’ can’t be set when action is permitted
Example
:
Meaning
: At
Configuration
>
Security
>
Network
>
ACL
>
Access Control List
you set the “Action”
parameter to “Permit”, which does not allow the “Port Redirect” parameter to be set to a Port (
Port 3
on
the screen above).
Recovery
:
1. Click the
OK
button to close the webpage message.
2. Either a) change the “Action” parameter selection, or b) change the “Port Redirect” parameter selection
to “Disabled”.
3. Click the
Save
button when done.
4. If a problem persists, contact TN Tech Support.
Message
:
Aggregation Error - Port joining aggregation must be in the same speed and in full duplex
Group 1 member counts error!! Local aggregation must include 2-16 ports.
LACP Error - LACP and Static aggregation cannot both be enabled on the same ports
Example
:
Meaning
: You configured a port for both LACP and Static aggregation, which is not supported.
For example, at
Configuration
>
Aggregation
>
Static
. and at
Configuration
>
Aggregation
>
LACP
you configured a port for both LACP and Static aggregation, which is not supported.
Recovery
:
1. Click the browser ‘Back’ button to clear the message.
