Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 366 of 669
PTP Clock's Port Data Set Configuration
Click on the Ports Configuration Page link in the PTP Clock’s Configuration section to display the
PTP
Clock's Port Data Set Configuration
table. The port data set is defined in the IEEE 1588 Standard.
It has three groups of data: the static members, the dynamic members, and configurable members which
can be set here.
The ports displayed here are the ports enable (checkboxes checked) at the PTP Clock Configuration
table in the Port List column (e.g., Ports 4-8, and 19-22 in the sample screen below).
The related
The PTP Clock's Port Data Set Configuration
table parameters are explained below.
Port
Static member port Identity: Port number (2-6). This is the S4224 port number. Note that PTP
configuration of the S4224 MGMT port is not supported.
Stat
Dynamic member
portState
: the current state of the port. The clock’s port status (e.g.,
dsbl
or
p2pt
).
MDR
Dynamic member log
Min Delay Req Interval
: The delay request interval announced by the master
(e.g.,
0
or
3
).
Peer Mean Path Del
The path delay measured by the port in P2P mode. In E2E mode this value is
0
(e.g.,
0.000,000,000
).
Anv
The interval for issuing announce messages in master state (e.g.,
1
). The valid range is
-3
to
4
.
ATo
The timeout for receiving announce messages on the port (e.g.,
3
). The valid range is
-1
to
10
.
Syv
The interval for issuing sync messages in the master (e.g.,
0
). The Sync Interval must be an integer
value between
-7
and
4
.
