Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 262 of 669
Secure
If selected, only static MAC entries are learned, all other frames are dropped.
Note:
Make sure that the link used for managing the S4224 is added to the Static Mac Table before
changing to secure learning mode, otherwise the management link is lost and can only be restored by
using another non-secure port or by connecting to the S4224 via the serial interface.
Static MAC Table Configuration
The static entries in the MAC table are shown here. The static MAC table can contain up to 64 entries.
The MAC table is sorted first by VLAN ID and then by MAC address.
Delete
Check to delete the entry. It will be deleted during the next Save.
VLAN ID
The VLAN ID of the entry. Each new line (VLAN entry) must have a unique VLAN ID.
MAC Address
Displays the assigned MAC address of the entry.
Port Members
Check one or more checkboxes to indicate which port(s) are members of the entry. Check or uncheck
as needed to modify the entry.
Note
: If none are checked, the MAC addresses for all ports will be
blocked.
Add New Static Entry
Click the
Add New Static Entry
button to add a new entry to the static MAC table.
Specify the VLAN ID (1-4094), MAC address, and Port Members included for the new MAC entry.
