Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 115 of 669
Network
: Sender IP filter is set to Network. Specify the sender IP address and sender IP mask in
the SIP Address and SIP Mask fields that appear.
Sender IP Address
When "Host" or "Network" is selected for the sender IP filter, you can enter a specific sender IP
address in dotted decimal notation. Notice the invalid IP address configuration is acceptable too,
for example, 0.0.0.0. Normally, an ACE with invalid IP address will explicitly adding deny action.
Sender IP Mask
When "Network" is selected for the sender IP filter, you can enter a specific sender IP mask in
dotted decimal notation.
Target IP Filter
Specify the target IP filter for this specific ACE.
Any
: No target IP filter is specified. (Target IP filter is "don't-care".)
Host
: Target IP filter is set to Host. Specify the target IP address in the Target IP Address field
that appears.
Network
: Target IP filter is set to Network. Specify the target IP address and target
IP mask in the Target IP Address and Target IP Mask fields that appear.
Target IP Address
When "Host" or "Network" is selected for the target IP filter, you can enter a specific target IP
address in dotted decimal notation. Notice the invalid IP address configuration is acceptable too,
for example, 0.0.0.0. Normally, an ACE with invalid IP address will explicitly adding deny action.
Target IP Mask
When "Network" is selected for the target IP filter, you can enter a specific target IP mask in
dotted decimal notation.
ARP Sender MAC Match
Specify whether frames can hit the action according to their sender hardware address field (SHA)
settings.
0
: ARP frames where SHA is not equal to the SMAC address.
1
: ARP frames where SHA is equal to the SMAC address.
Any
: Any value is allowed ("don't-care").
RARP Target MAC Match
Specify whether frames can hit the action according to their target hardware address (THA) field
settings.
0
: RARP frames where THA is not equal to the target MAC address.
1
: RARP frames where THA is equal to the target MAC address.
Any
: Any value is allowed ("don't-care").
IP/Ethernet Length
Specify whether frames can hit the action according to their ARP/RARP hardware address length
(HLN) and protocol address length (PLN) settings.
0
: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not equal to
IPv4 (0x04).
1
: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4
(0x04).
Any
: Any value is allowed ("don't-care").
