Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 579 of 669
Message
:
Cannot enable HTTPS redirect function when the HTTPS operation mode is disabled.
Meaning
: At
Configuration
>
Security
>
Switch
>
HTTPS
you selected an HTTPS configuration of
Mode = Disabled and Automatic Redirect = Enabled, which is not supported.
Recovery
:
1. Click the
OK
button to clear the webpage message.
2. At
Configuration
>
Security
>
Switch
>
HTTPS
select an HTTPS configuration of either:
Mode
= Disabled and
Automatic Redirect
= Disabled, or
Mode
= Enabled and
Automatic Redirect
= Disabled, or
Mode
= Enabled and
Automatic Redirect
= Enabled.
3. See “
HTTPS Configuration
” on page
200
for more information.
Message
:
VLAN Translation Table -- Updating...
Meaning
: At
Configuration
>
VLAN
Translation
>
VID
Translation
Mapping
you tried to add a new
VLAN translation table entry, but the attempt failed.
Recovery
:
1. Press the
Reset
button.
2. Click the browser Back button.
3. At the CLI, enter the command
config default keep_ip
and press
Enter
.
4. Restart the S4224 web interface.
Message
:
The value of ‘Key cannot be empty
Meaning
: At
Configuration
>
Aggregation
>
LACP
you clicked the
Save
button without first entering a
Key
entry field entry.
Recovery
:
1. Click the
OK
button to close the message dialog box.
2. Enter a
Key
entry field entry.
3. Click the
Save
button when done. See ‘
LACP (Link Aggregation Control Protocol)
’ on page
Message
:
Switch does not respond.
Meaning
: You tried to enable both ACL policer and EVC policer functions at the same time.
Recovery
:
1. Click the
OK
button to clear the webpage message.
2. Log back in to the S4224 web interface if your web browser can no longer display the webpage.
3. Retry the operation.
4. Check the CLI for the message “
Error: ACL policer and EVC policer cannot both be enabled
”.
5. At the CLI, press the
Enter
key to re-display the CLI main (startup) screen.
6. Enter the CLI command “
config default keep_config
”.
7. Log in again via the S4224 web interface.
Message
:
HTTPS Certificate Load Error. SSL Certificate PEM file size too big
Meaning
: At
Configuration
>
Security
>
Switch
>
HTTPS
you tried to download a HTTPS / SSL
certificate file that exceeded the file size limit.
Recovery
:
1. Click the browser Back button.
2. Check the SSL certificate file in terms of size and content.
3. Retry the operation. See “
HTTPS Configuration
” on page
61
.
