TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Appendix A - Command Set Summary Page 97
EXAMPLE
To monitor the MSE for 2sec
(trango-view)# mse 2
1> -33.81
2>
-33.86
RELATED
Linktest, rssi
opmode
SYNTAX
opmode <on | off>
DEFAULT VALUE
Off
DESCRIPTION
Opmode command is used to enable the transmitter on
the system Opmode settings are not persistent across
reboot. See default_opmode command
Freq needs to be set, before opmode can be urned ON
EXAMPLE
Set opmode on
(trango-config)# opmode on
opmode: on
RELATED
Default_opmode, freq
passwd
SYNTAX
Passwd <new_passwd> <new_passwd>
DEFAULT VALUE
trango
DESCRIPTION
Passwd command is used to change the passwd for the
config node. The change is persistent across reboot.
EXAMPLE
Set the passwd of config node to “apex”
(trango-config)# passwd apex apex
