![Trango Systems TrangoLINK APEX 18 User Manual Download Page 32](http://html1.mh-extra.com/html/trango-systems/trangolink-apex-18/trangolink-apex-18_user-manual_1150515032.webp)
TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Chapter 3 - Configuration
Page 30
RPS
– Rapid Port Shutdown is
o
Disabled (“Off”) – The unit will not shut down the GigE/SFP when the
wireless link is lost.
o
Enabled (“On”) – The unit will shut down the GigE/SFP port when the
wireless link is lost. The remote end will also be notified of the port
shutdown.
RSSI LED-
Receive Signal Strength Indicator is
o
Disabled (“Off”) - The RSSI LED is off and does not display any RSSI
values.
o
Enabled (“On”) – The RSSI LED will display the RSSI values.
Smart Mode-
Internal VLan port mapping is
o
Disabled (“Off”) – There is no internal VLan port mapping
o
Enabled (“On”) – Internal VLan port mapping between GE1 and SFP ports
keep traffic separate. Smart Mode must be enabled to support IBM.
SNMP Trap –
Simple Network Management Protocol Trap
o
Disabled (“Off”) - The unit will generate no SNMP Trap messages.
o
Enabled (“On”) – SNMP Trap messages will be sent the IP destination
configured.
TFTPD –
Trivial file transfer protocol daemon is
o
Disabled (“Off”) - The unit will not accept TFTP file requests.
o
Enabled (“On”) – The unit will accept TFTP file requests so that the unit
can be upgraded.
Telnetd –
Telnet daemon is
o
Disabled (“Off”) - The unit will not accept Telnet session requests.
o
Enabled (“On”) – The unit will accept Telnet session requests so that the
unit can be managed via Telnet.