TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Appendix A - Command Set Summary Page 113
DESCRIPTION
Threshold command is used to set rules for monitoring the
system. Whenever the threshold exceeds the
programmed values the desired action is set.
EXAMPLE
Set RSSI min threshold to –80 and action to send a
snmptrap.
(trango-config)# threshold 0 min -80 3
min = -80
SUCCESS
RELATED
Snmptrap, snmpd, trapip,
trapip
SYNTAX
Trapip < manager 1 | 2 ><ipv4 address>
DEFAULT VALUE
0.0.0.0
DESCRIPTION
Trapip is used to set the ip address of the snmptrap
manager destination. 2 trapip (snmp managers) can be
configured.
EXAMPLE
Set manager 1 trapip to 10.8.1.32
(trango-config)# trapip 1 10.8.1.32
Trap IP Address: 10.8.1.32
SUCCESS
RELATED
snmptrap, snmpd
uptime
SYNTAX
Uptime
DEFAULT VALUE
N/A
