TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Appendix A - Command Set Summary Page 110
in the failover (1+1) setup and N/A for 1+0 setup
On detecting the Standby unit the Active unit
synchronized the current system setting with the Standby
unit.
EXAMPLE
To display the current synchronization state
(trango-config)# sync_state
Sync State: Synchronized
RELATED
Failover, sync
syslog
SYNTAX
Syslog <clear>
DEFAULT VALUE
N/A
DESCRIPTION
Syslog command is used to display system event log. All
the configuration changes and errors are logged.
The system log is a circular buffer and old entries will be
deleted once the buffer becomes full. The buffer can have
1000 entries.
Syslog clear, is used to clear the log buffer.
EXAMPLE
To display the current system log
(trango-config)# syslog
Current 0:01:08:36.120
0> 0:01:08:33.440 [1] [ATTN] eth_set_port_speed: port 0
speed=1000
RELATED
N/A
targetrssi
SYNTAX
targetrssi <value>
Value = -88 to –25 dBm
