TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Appendix A - Command Set Summary Page 95
RELATED
Mse,rssi
loglevel
SYNTAX
loglevel <0-2>
where 0: Setting
1: Event
2: Status/Statistics
DEFAULT VALUE
Default 0 1
DESCRIPTION
This command is used to set required log levels for
system logging. The log level needs to be set for each
activity to be monitored. Once the loglevels are set, the
logs can be monitored through the
“syslog”
command
E.g.: Setting the loglevel to 2 will only log Status/Stats.
The loglevel needs to be set to “loglevel 0 1 2” to monitor
all logs
EXAMPLE
To set the loglevel to monitor all logs
(trango-config)# loglevel 0 1 2
Syslog level = 0 1 2
RELATED
syslog
loopback
SYNTAX
loopback <off | dig | if | rf_gen | rf_refl>
DEFAULT VALUE
Off
DESCRIPTION
This command is to set the loopback mode.
Digital and If loopback doesn’t require a link. It use to
isolate problems on the ADUC/IF only.
Opmode ON is required for the IF loopback mode.
