TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Chapter 3 - Configuration
Page 31
IP Configuration and Model
The following information is displayed in the IP configuration and model section of the
“Sysinfo page”. These settings affect the OUT OF BAND MANAGEMENT port only.
IP Address
– Displays the current configured Internet Protocol Address of the
unit.
Subnet Mask
– Displays the current configured Subnet Mask the unit is using.
Default Gateway
- Shows the current Default Gateway for the unit.
SNMP Trap IP 1
– SNMP traps will be sent the Internet Protocol Address shown.
SNMP Trap IP 2
– SNMP traps will be sent the Internet Protocol Address shown.
Model
– The model of the unit is shown.
Serial ID
- The unique serial ID of the unit is shown.
ETH0 MAC
– The Ethernet Media Access Control Address of the management
port of the unit. (Required for license upgrade keys)
ETH1 MAC
– The Ethernet Media Access Control Address of the data Ethernet
port of the unit. This is used by the IBM feature.
System Version
The Current and Previous Image information on the following settings is displayed in the
System Version section.
FPGA
– Displays the current unit Field Programmable Gate Array (FPGA)
version.
Firmware
- The current version of firmware the unit is displayed
OS
– The current version of the operating system the unit is shown
PIC
– Displays the current version of firmware for the microcontrollers of the unit.
MODEM
– Displays the current version of the modem firmware for the unit.
RFM
– Displays the current RF Module (Band) of the unit.
