TrangoLINK Apex™ 18 User Manual Rev. 1.0 Section: Appendix A - Command Set Summary Page 76
Web Interface: trango
snmp trap: trapstr
smart_mode
<on | off>
On
snmpd
<on | off >
On
snmptrap
<on | off >
Off
speed
<channel_bw> <modulation>
<5> <qpsk>
channel_bw 0-5 (10,20,30,40,50)
5
modulation qpsk, qam16, qam64,qam128,qam256 Qpsk
status
<modem | fifo | pll | port | all | clear>
N/A
sysinfo
<0-6>
0 (if command executed
without any param)
syslog
<clear> N/A
targetrssi
<-88 - 25>
-40
temp
N/A N/A
telnetd
on/off On
tftpd
on/off Off
<param> <min | max> <value>
<action>
Default action is None.
param : 0 rssi, 1 mse, 2 ber, 3 fer, 4
temp, 5 in port util, 6 out port util
min|max: param dependent
threshold
action: 0 none, 1 alaram1, 2 alarm2 ,3
snmptrap
trapip
<Manger 1 | 2 > <valid ipv4 address>
0.0.0.0
Reset will change the prev
configured trapip
uptime
N/A N/A
utype
N/A active
version
N/A N/A
