manualshive.com logo in svg

Trango Systems TrangoLINK APEX 18, User Manual

Share
Download
Trango Systems TrangoLINK APEX 18 User Manual Download Page 103

TrangoLINK Apex™ 18 User Manual Rev. 1.0      Section: Appendix A - Command Set Summary             Page 101 

SUCESS 

 

RELATED 

Reset 
 

 
 

reset                  

 

SYNTAX 

reset 
 

DEFAULT VALUE 

N/A 
 

DESCRIPTION 

Reset is used to restore factory default settings. 
All currently configured settings will be lost. Reboot of the 
radio is required for the new settings to take effect. 
 
The command doesn’t ask for any confirmation. 
User caution is required before reboot. 
 

EXAMPLE 

Restore factory default settings 

(trango-config)# reset 
Default setting restored. Issue reboot command for the default to take 
effect 
 
SUCCESS 

 

RELATED 

Reboot 
 

 
 

rps_enable 

 

 

SYNTAX 

rps_enable < on | off> 

 

DEFAULT VALUE 

Default:  Off 
 

DESCRIPTION 

This command is used to configure Rapid Port Shutdown 
(RPS) functionality. The RPS setting needs to be the 
same on both side of the link for proper operation.  
 
If the RPS is enabled the dataports (GigE) on both side of 
the link are immediately shutdown in the event of a link 
loss in order to provide a fast switchover mechanism to 
the external routers and switches. 

 

Summary of Contents for TrangoLINK APEX 18















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands