18
3.2.3. Overview of Operation
Console panel [SET66-Z] provides three types of operation modes.
MONI (Monitor) mode
FNC (Function setting) mode
Protection display mode
The operation overview is described in the following table.
Power-on
Check the model/mode of
VF66B (DC motor drive)
<In MONI (monitor) mode>
VF66B (DC motor drive) operation status
(rotation speed/output current/output
voltage, etc.) is displayed on the display of
the console panel (seven-segment
five-digit display).
<Model> <Mode>
r/min
Ｈｚ
Ａ
Ｖ
ＦＮＣ
ＤＩＲ
ＲＥＶ
ＡＬＭ
ＲＵＮ
ＪＯＧ
ＦＮＣ
ＲＥＳＥＴ
ＦＷＤ
ＪＯＧ
ＳＴＡＲＴ
ＳＴＯＰ
ＲＥＶ
MONI
ＳＥＴ
→
r/min
Ｈｚ
Ａ
Ｖ
ＦＮＣ
ＤＩＲ
ＲＥＶ
ＡＬＭ
ＲＵＮ
ＪＯＧ
ＦＮＣ
ＲＥＳＥＴ
ＦＷＤ
ＪＯＧ
ＳＴＡＲＴ
ＳＴＯＰ
ＲＥＶ
MONI
ＳＥＴ
→
Press the [MONI/FNC] key
Press the [MONI/FNC] key
<In protection display mode>
Following actions are taken when
protection operation occurs:
- Displays the protection operation
- Performs the one-point traceback
display
*When the [MONI/FNC] key is pressed
while the operation is stopped in the
protection display mode, the mode
changes to the MONI (monitor) mode.
After that, if no operation is performed for
several seconds, the mode changes back
to the protection display mode.
<FNC (function setting) mode>
FNC (LED) turns on during the FNC (function setting) mode.
You can set the parameters, etc. required to operate the
VF66B (DC motor drive).
Protection
occurs
Protection
occurs
r/min
Ｈｚ
Ａ
Ｖ
ＦＮＣ
ＤＩＲ
ＲＥＶ
ＡＬＭ
ＲＵＮ
ＪＯＧ
ＦＮＣ
ＲＥＳＥＴ
ＦＷＤ
ＪＯＧ
ＳＴＡＲＴ
ＳＴＯＰ
ＲＥＶ
MONI
ＳＥＴ
→
Protection
released
Press the [STOP/RESET] key
