93
Multifunction Output Terminal Function Description List
No. Item
Function
description
1, 4
Speed detection (1) (2)
(speed is equal to the
detection setting)
When the speed corresponds to the
speed detection
(1) (2) (H-06, H-07) setting within
the ± speed detection width (H-08), the output is turned on.
The hysteresis width of 0.2% of the maximum speed (A-00) is provided for the
output.
* "Top" in the figure indicates the maximum speed (A-00).
Speed detection (1) output
Speed
Speed detection (1)(H-06)
Speed detection width (H-08)
Hysteresis width 0.2%/Top
Speed detection (2)(H-07)
Speed detection (2) output
2, 5
Speed detection (1) (2)
(speed is more than or
equal to the detection
setting)
When the speed exceeds the speed detection (1) (2) (H-06, H-07), the output is
turned on.
(The speed is detected using a signed value instead of an absolute value.)
Speed detection (1) output
Speed
Speed detection (1) (H-06)
Hysteresis width 0.1%/Top
Speed detection (2) (H-07)
Speed detection (2) output
3, 6
Speed detection (1) (2)
(speed is less than or
equal to the detection
setting)
When the speed is less than the speed detection (1) (2) (H-06, H-07), the output is
turned on.
(The speed is detected using a signed value instead of an absolute value.)
Speed detection (1) output
Speed
Speed detection (1)(H-06)
Hysteresis width 0.1%/Top
Speed detection (2)(H-07)
Speed detection (2) output
7
Specified value reached
When the speed reaches ±0.1% of the speed command value, the output is turned
on.
Operation command
Speed
0.1%/Top
Speed command
Output when specified value reached
Revolving speed setting
0.4%/Top