15
Chapter 3 For Operation
3.1. Overview of Operation
3.1.1. Power-On
This section provides the overview of the operating procedure until the power-on.
Preparation/Wiring
Check the model/
mode to use
Power-on
Model of VF66B
(DC motor drive)
Wire the VF66B (DC motor drive) and the power supplies (R/L1, S/L2,
T/L3), VF66B (DC motor drive) (P and N) and the motors (A, F), and the
ground (
).
Monitor display of console panel [SET66-Z]
The following items will be displayed on the
display of the console panel [SET66-Z].
1.5 sec.
2. Then the model is displayed for 1.5 seconds. Two rightmost digits indicate the
feeding voltage. When the voltage class is “200 V class,” “22” is displayed. When it
is “400 V class,” “44” is displayed.
1. The mode is displayed for 1.5 seconds.
1.5 sec.
Mode
Setting block
display
3
. Then, symbols distinguishing the setting block and the mode are displayed.
From the leftmost digit, each digit shows the following:
[Mode of the first setting block][-][Mode of the second setting block][Current setting block]
VF66B (DC motor drive) mode is indicated as follows:
d: Indicates that it is in the DC motor drive mode.
<The figure on the left shows that the DC motor drive mode is set in both first setting block
and second setting block. The current setting block is the first setting block.>
r/min
Ｈｚ
Ａ
Ｖ
ＦＮＣ
ＤＩＲ
ＲＥＶ
ＡＬＭ
ＲＵＮ
ＪＯＧ
ＦＮＣ
ＲＥＳＥＴ
ＦＷＤ
ＪＯＧ
ＳＴＡＲＴ
ＳＴＯＰ
ＲＥＶ
MONI
ＳＥＴ
→
