Toshiba Surveillix XVSv16-240-X User Manual Download Page 91

Page: 91 / 122

32861AA

SEARCH IN LIVE

The Search in Live feature allows users to review events immediately while monitoring live video. Pause, rewind, and resume live video
within seconds of an alarm event or suspicious activity.

Move the mouse cursor over the desired live video display on the Live Display screen.

Right-click and choose

Search In Live

(or click the scroll wheel on the mouse).

The Search In Live controls will display at the bottom of the image.

Use the controls to pause, rewind, move frame-by-frame or resume playing as desired.

To exit Search in Live, click the scroll wheel on the mouse in the camera area you have been searching.

Summary of Contents for Surveillix XVSv16-240-X



























































































































Search results

Summary of Contents for Surveillix XVSv16-240-X

Reviews:

Related manuals for Surveillix XVSv16-240-X

Brands by name

Popular brands

Toshiba Surveillix XVSv16-240-X, User Manual

Search results

Summary of Contents for Surveillix XVSv16-240-X

Reviews:

Related manuals for Surveillix XVSv16-240-X

Brands by name

Popular brands