32861AA
49
MOTION DETECTION SETUP
The recorder allows the user to adjust several different Motion Settings and create motion detection areas.
Create a Motion Area
1.
On the Display screen, click
Setup
.
2.
Click
Motion Detection
.
3.
Select a camera from the
Select Channel
list.
4.
Select
Detect Detail Motion Area
.
5.
Click
Clear Motion Area
.
6.
Click
Setup Advanced Motion Area
.
7.
Click a
Motion Detection Area
shape button.
8.
Drag the mouse over the camera image.
Note
To create a polygon shape, click the mouse at each point and double-click to close
the shape.
9.
Click
OK
.
10.
Move the sliders to adjust motion sensitivity and the noise filter.
11.
Define the pre-alarm and post-alarm recording time for a motion event.
Pre Alarm Recording
– 0 - 120 Seconds [The number of seconds the recorder records before motion is detected—to ensure any motion
occurring between I-frames is captured, set to a value greater than 0]
Post Alarm Recording
– 0 - 120 Seconds [The number of seconds the recorder records after it stops detecting motion]
Set up
advanced
motion
area
Set pre-alarm
recording duration
Set post-alarm recording and
sensor duration
Reduce analog signal
noise from Motion
Detection
