32861AA
51
PTZ CAMERA SETUP
PTZ cameras can be configured and controlled using the Surveillix recorder software. For instructions on configuring and installing your
PTZ camera, refer to the camera manual.
Enabling an Analog PTZ Camera
1.
Ensure that you have properly connected your analog PTZ camera to the recorder.
2.
On the Display screen, click
Setup
.
3.
Click
Camera Setup,
and then click
PTZ Setup.
4.
Click
Select Channel
, and then click the analog channel you want to enable as a PTZ camera.
5.
Click
Enable Pan Tilt Connection
.
6.
Type the appropriate
Protocol
,
Port
,
Baud Rate
,
Parity
,
Data Bits
and
Stop Bits
for your analog PTZ camera. These must
be the same settings that have been configured on the camera itself.
7.
Set the appropriate
General
and
Preset/Tours
options.
8.
Click
Apply
to save your settings.
Note
For more information regarding creating preset positions, PTZ tour schedules, and controlling your PTZ camera, please refer to
the Pan/Tilt/Zoom chapter of this manual.
Enabling an IP PTZ Camera
1.
Ensure that you have properly connected your IP PTZ camera to the network.
2.
On the Display screen, click
Setup
.
3.
Click
IP Cameras
, and then click
Advanced Camera Setup
.
4.
Select the IP camera from the
Network Cameras Currently in Use
list.
5.
Select
PTZ Camera
.
6.
Click
Apply
to save your settings.
