32861AA
105
LAN OVERVIEW
The recorder can be easily connected to a Local Area Network (LAN) and uses Microsoft’s® powerful and secure Windows® 7
Embedded operating system. This allows for easy and well-documented instructions on setting up LAN connections no matter what type
of LAN you want to use.
A LAN is a group of computers and other devices dispersed over a relatively limited area and connected by a communications link that
allows one device to interact with any other on the network.
There are many reasons why using Microsoft® Windows® 7 Embedded is superior to other platforms when running on a LAN. The
number one reason is security. Windows 7 Embedded is based on the Microsoft’s Windows platform, which, historically has boasted the
most reliable and secure operating system in the world. Running the recorder on a secure network is important to prevent unwanted users
from gaining access to confidential information. Unwanted users can compromise the integrity of the confidential data being stored and
viewed, and in extreme circumstances can cause irreparable damage to the network.
Since connecting the recorder to a network can be extremely complex (depending on the network), this Surveillix recorder manual will
cover only the basics. It is suggested that the recorder administrator consult the Vendor or IT Administrator before attempting to create or
connect to a LAN.
CONNECTING TO A LAN USING TCP/IP
The networking options of the recorder can be created and modified via the standard networking options available on Windows 7
Embedded. The recorder comes equipped with a 10/100/1000 Network Interface Card (NIC). This card uses a standard RJ-45 connector,
and should be connected using CAT5 Ethernet cable to achieve optimal communication speeds.
Configuring TCP/IP Settings
1.
On the Display screen, click
Exit
and select
Restart in Windows Mode
.
2.
Right-click Network on the desktop and select
Properties
.
3.
Click
Local Area Connection
.
4.
Click
Properties
.
5.
Select
Internet Protocol Version 4 (TCP/IPv4)
, then click
Properties
.
6.
Select
Use the Following IP Address
option. Enter the
IP Address
and
Subnet
mask appropriate for the network. It is
recommended to contact the Network Administrator for appropriate IP settings.
Example:
a. Common IP addresses are 192.168.0.25 or 10.0.0.25
b. Common Subnet masks are 255.255.255.0 or 255.0.0.0
Note
In order to connect to the recorder through a remote LAN connection, a static IP address must be assigned. If the network assigns
the IP address automatically (DHCP), contact the Network Administrator for help assigning a static IP address.
7.
If the network requires you to specify the DNS information, enter it now by selecting the appropriate DNS options.
8.
When finished configuring the TCP/IP settings click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9.
Click
Close
and then
Close
again to close both
Local Area Connection Properties
windows.
