Toshiba Strata DK PC Attendant Console User Manual Download Page 105

Page: 105 / 144

Message Center

Creating LCD Messages

Strata DK PC Attendant Console 5/00

➤

To view LCD messages stored in the DK System

Sending LCD Messages

Any station or console may record a message. Stations that do not use Soft Keys (Soft
Keys Off: Mode 70) may send messages “live” to other LCD stations, console users,
or a paging group.

1. From the Menu Bar,

select Messages.
Then select LCD
Messages.

The Messages dialog box displays.

2. Select the message

number to be viewed.

Personal (10~19) or system messages (60~99).

3. Select the Retrieve

Msg button.

The console gets the current LCD message from the
DK System.

1. From the Menu Bar,

select Messages.
Then select LCD
Messages.

The Messages dialog box displays.

2. Enter or use the Drop

Box to select from
the Directory a
location to send the
message.

Enter the station or console number if it is to be sent to
a single location.

3. Select the message to

be sent.

Personal (10~19) or system messages (60~99).

4. Select the appropriate

button to send the
message.

The message can be sent to an individual station, a
pre-defined group defined by your paging groups or
all stations.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands