Toshiba Strata DK PC Attendant Console User Manual Download Page 55

Page: 55 / 144

Basic Calling

Voice Mail

Strata DK PC Attendant Console 5/00

➤

To manually connect to Voice Mail

3. Select the OK

button.

You hear the Voice Mail greeting.

The PC Attendant Console calls the voice mail pilot.

Console setup settings must have the Voice Mail Pilot
number and prefix digits programmed in the Trans VM
Settings section.

4. When the voice

mail answers
and you can hear
the opening
greeting, click
on the Transfer
button.

The PC Attendant Console uses the mail box for the
extension found in the directory.

1. Dial the Voice

Mail code.

2. From the Main

Screen, press the

Tone

button

from the
keyboard and
dial to the voice
mail.

3. To close the out

Dialing Dialog
box, click close.

The dialog box clears while remaining on the
connection.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands