Toshiba Strata DK PC Attendant Console User Manual Download Page 59

Page: 59 / 144

Basic Calling

Calling Options

Strata DK PC Attendant Console 5/00

Calling Options

The following summarizes available calling options.

➤

To change from Ring
First instead of Voice
First, select the Ring
soft key.

This changes the default setting so that you can
immediately talk to the called party through their
telephone speaker.

➤

To change from
Voice First to Ring
First, select the Voice
soft key.

This changes the default setting so that the called
party’s telephone rings.

➤

To Hang Up, select
the Release button.

➤

Select the Exec
Override button.

This enables you to “barge in” to an existing call.

➤

Select the DND
Override button.

This overrides the Do Not Disturb (DND) by sending
a tone to the called telephone to alert them that a call is
waiting.

➤

Select the Priv. Over
button.

Note

The CO line must be assigned to appear on the
console for this feature to operate.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands