Toshiba Strata DK PC Attendant Console User Manual Download Page 91

Page: 91 / 144

Directory

Adding/Deleting Entries into the Directory

Strata DK PC Attendant Console 5/00

2. Select the New

button to add an entry

...or select an entry to
cut, then select the
Delete button.

Either a blank Directory entry or a selected entry to
modify or delete appears.

An alternative would be to use Directory Find to go to
an existing entry to modify or delete.

3. Type the entry

information in each
field.

To enter an ACD
Group, enter AXX
(xx=01~16).

Note

Up to eight digits are allowed for the “Phone:”
entry.

4. Select the Save

button when all
entries or
modifications are
made.

5. Select the OK button.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands