Toshiba Strata DK PC Attendant Console User Manual Download Page 100

Page: 100 / 144

Message Center

Message Waiting Indications Sent

Strata DK PC Attendant Console 5/00

Message Waiting Indications Sent

Message waiting indicators are used to alert you to stations you have sent this
indicator.

2. Select a name from

the directory for the
message.

The directory scrolls showing the complete directory
including people who may not have a phone on the
system.

3. Select the message to

retrieve.

A list of messages appear in the message window. The
selected message should be highlighted.

4. Select the View Msg

button.

The message note pad shows the message taken
earlier.

5. From the Messaging

Dialog box, you have
the following
options.

Delete the message
by selecting the
Delete button.

Individual messages may be deleted after being read
back to the person.

To save the message,
select the Cancel
button or go to the
next message.

By not deleting the message, it will remain in the
system. You do not need to Send and Save.

Selecting the Next
Message or Prev
Message button.

When you delete a message, you will automatically
move to the next message, if there is one.

6. From the Print

Options dialog box,
select the Print
button, then select the
messages to print.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands