Toshiba Strata DK PC Attendant Console User Manual Download Page 121

Page: 121 / 144

Administration

User Buttons

Strata DK PC Attendant Console 5/00

107

➤

To clear user buttons

2. From the User

Buttons dialog, select
the button to be
changed.

A default button exists to allow all buttons to be
assigned to a preset standard.

3. Select either Autodial

or Feature to change
the button.

4. Enter a feature code

for the list by
selecting from the
pull down list or
selecting the Digits
box and entering a
number.

5. Select Label to

change, if necessary.

6. Select the next button

to change and repeat
the process.

7. Select the OK button

when all changes
have been made.

1. From the System

Settings dialog box,
select User Buttons.

Summary of Contents for Strata DK PC Attendant Console

















































































































































Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands

Toshiba Strata DK PC Attendant Console, User Manual

Search results

Summary of Contents for Strata DK PC Attendant Console

Reviews:

Related manuals for Strata DK PC Attendant Console

Brands by name

Popular brands