manualshive.com logo in svg

Toshiba Strata CIX GVPH, Programming Manual, Page: 98 / 184

Share
Download
Toshiba Strata CIX GVPH Programming Manual Download Page 98

Menus

Notify Menu

4-32

Strata CIX40 Voice Processing Programming Manual    7/06

Notify Record Options

Notify fields for the record highlighted in the Notify Record Summary area.

Enabled

Enable or disable the current Notify record. 

Yes: Enable the record. Voice processing carries out the instructions defined by the 

record.

No:

Disable the current Notify record.

Important!

Using voice processing’s User Notification option for his/her User ID mailbox, 

a user can enable or disable an existing Notify record and modify the contents of the 
record’s Variable field.

Possible values: Yes, No
Default:

Yes (enabled)

Frequency of Notification

MTWTFSS

Days of the week to which notification is restricted.

Y:

Notification occurs on this day of the week.

N:

Notification does not occur on this day of the week.

In the following example, notification is scheduled for Monday, Wednesday, and Friday only.

Restricted To:MTWTFSS

YNYNYNN

Possible values: Y, N
Default:

Y

From 

Start notification time (hh:mm). Military format (24-hour clock); e.g., 5:30 p.m. is 
represented as 17:30. Always less than 

To

. To specify 24 hours, set 

From

 at 00:00 and 

To

 at 

23:59.

Default:

00:00

To

End notification time (hh:mm). Military format (24-hour clock). Always more than 

From

. To 

specify 24 hours, set 

From

 at 00:00 and 

To

 at 23:59.

Default:

23:59

Notify After

Number of minutes before voice processing attempts the first notification to a user after 
someone leaves a new message.

Important!

If this is the only enabled Notify record, use the default value 0. If there is 

more than one enabled Notify record for the same date and time, set Notify After to a 
different number of minutes for each record. This avoids potential conflict.

Possible values: 0~ 60
Default:

0 (immediately)

Continue Every

Number of minutes before voice processing re-attempts notification after the first 
notification. For example, every 60 minutes means notify this user every hour after the first 
notification.

Possible values: 0~60
Default:

2 (minutes)

Table 4-12

Notify Menu Screen Fields 

(continued)

Summary of Contents for Strata CIX GVPH

























































































































































































Reviews:

No comments