Toshiba Strata CIX GVPH, Programming Manual, Page: 159 / 184

Maintenance and Troubleshooting
Tools
Strata CIX40 Voice Processing Programming Manual 7/06
8-7
Ma
in
ten
a
nc
e a
nd
T
rou
bl
esh
o
o
ti
ng
...or to cancel without selecting a dial code, press
Esc
.
Note
If the CIX is configured for Tone First ringing remove the "1-" from "What to do
AFTER dialing the user ID extension". The remaining dial codes do not require any
changes.
4. After making the selection, press
ESC
. The Telephone System Configuration screen
displays.
5. From the Telephone System Configuration screen, press
1
. The changes are
transmitted to Stratagy and Stratagy is shut down and restarted. By shutting down and
restarting Stratagy, the changes take effect.
...or
2
.The changes are transmitted to Stratagy but Stratagy is not shut down or
restarted. Until you restart Stratagy, the changes do not take effect.
...or
3
. The changes you made are cancelled and not saved.
6. If you pressed
1
to save the changes, press any key to reboot. The DOS prompt
displays. To continue, you must re-enter Stratagy Admin.
Modify a Dial Code
If the telephone system you desire does not appear on the Telephone System Dial Codes
Screen or further modifications to the dial codes are needed, you can modify a dial code
parameter.
1. From the Tools menu, press
4
. The Telephone System Configuration screen displays.
2. From the Telephone System Configuration screen, press
1
. The Telephone System
Dial Codes screen displays.
3. Use the arrow keys (
↑↓
) and/or
Page Up
and
Page Down
keys to highlight the dial
code parameter and press
Enter
.
The line appears at the top of the screen.
4. Modify the dial code using the line editor at the top of the screen.
See Table 8-2 below for a listing of the dial code parameters and their definitions and
settings.
5. After making the change(s), press
ESC
. The Telephone System Configuration screen
displays.
6. From the Telephone System Configuration screen, press
1
. The changes are
transmitted to Stratagy and Stratagy is shut down and restarted. By shutting down and
restarting Stratagy, the changes take effect.
...or
2
.The changes are transmitted to Stratagy but Stratagy is not shut down or
restarted. Until you restart Stratagy, the changes do not take effect.
...or
3
. The changes you made are cancelled and not saved.
7. If you pressed
1
to save the changes, press any key to reboot. The DOS prompt
displays. To continue, you must re-enter Stratagy Admin.