Toshiba Strata CIX GVPH, Programming Manual, Page: 121 / 184

Token Programming
Defined Tokens
Strata CIX40 Voice Processing Programming Manual 7/06
19
[( )
Read %S variables state—reads the values of all twenty %S variables (%S0~%S19) from the
specified file. The format expected is a one line, comma delimited, ASCII file where the first value is
%S0, the second is %S1, etc.
When the [( ) token is used with the ]( ) token, you can read, modify, and write (remember) %S
variables.
Note To avoid potential simultaneous access errors: within the same User ID, if you read with the [( )
token, write with the
]( )
token.
Syntax
[(file)
where:
file ASCII file with columns separated by commas (comma delimited). Valid 8x3 DOS file name.
Can be a variable.
Note Maximum of 1 custom-made file is taken as 4KB.
]( )
Write %S variables state—writes the values of all twenty %S variables (%S0~%S19) to the specified
file. Typically, you would use this with the
[( ) token which reads the %S variables.
Note To avoid potential simultaneous access errors: within the same User ID, if you read with the [( )
token, write with the
]( )
token.
Syntax
](file)
where:
file ASCII file with columns separated by commas (comma delimited). Valid 8x3 DOS file name.
Can be a variable.
Note Maximum of 1 custom-made file is taken as 4KB.
^( )
Change port volume—changes the volume of the current port to the specified level.
Notes
•
The voice processing system configuration gain_norm parameter sets the starting volume
for all ports ( Chapter 2 – Configure UADM2 Software ).
•
For the user, the current port volume can be set through the Users Menu’s Message Volume
field and by the user with the Play Message Controls ( Chapter 4 – Menus ).
Syntax
(n)
where:
n Volume of current port
(range: -2~4). -2 is the softest
0 is the initial volume
4 is the loudest.
Table 5-3 Defined Tokens (continued)
Token Description