manualshive.com logo in svg

Toshiba Strata CIX GVPH, Programming Manual, Page: 148 / 184

Share
Download
Toshiba Strata CIX GVPH Programming Manual Download Page 148

System Reports

Report Definitions

7-4

Strata CIX40 Voice Processing Programming Manual    7/06

Create Report Definitions

1. From the Main Menu, press 

Alt+R

.

2. Type the password and press 

Enter

. (The default password is 

Stratagy

, with the 

first letter uppercase.) The Reports screen displays (see 

Figure 7-2

).

3. Number the Report Definition Fields in the column order you want them to appear on 

the report.

For example, if you want a report listing the User ID, Calls Last, and Messages 
Maximum from left to right, the values for these fields would be:

User ID

: 

1

Messages Maximum

: 

3

Calls Last

: 

2

4. Select Save by pressing 

Alt+S

.

Note

Only report definitions which you plan on using again should be saved.

5. Type RPT.RPT and press 

Enter

.

Note

The report name is set for 
"RPT.RPT" and you cannot 
enter anything else.

6. When you have finished with the 

Reports Menu, press 

Esc

. The 

Main Menu displays.

Load Exist Report Definition

1. From the Reports screen, press 

Alt+L

.

2. Type RPT.RPT and press 

Enter

. 

Note

The report name is set for 
"RPT.RPT" and you cannot enter 
anything else.

3. Press 

Enter

 again. The Reports 

Menu displays the report definition 
selection.

4216

4070

Summary of Contents for Strata CIX GVPH

























































































































































































Reviews:

No comments