Toshiba Strata CIX GVPH Programming Manual Download Page 20

Page: 20 / 184

Access and Use UADM2 Admin

Main Menu Field Descriptions

1-10

Strata CIX40 Voice Processing Programming Manual 7/06

Main Menu Field Descriptions

Figure 1-3

Main Menu with Sample Data

Table 1-4

Main Menu Screen Fields

Menu Bar

Access Options (select).

Users

Press Alt+U to access the Users Menu.

See the Programming Section.

Reports

Press Alt+R to generate reports.

See

“Run Report” on page 1-5

for more information.

Shutdown

Press Alt+S to shut down the GVPH system.

See

“System Shutdown” on page 1-7

for more information.

Tools

Press Alt+T to use the Tool Utility.

See

“Filecopy” on page 1-16

for more information.

Date/Time

Not Supported.

Quit

Important!

This function quits the UADM2 Admin program and does not shut down the
GVPH.

Press Alt+Q. The remote PC exits Admin and returns to the DOS® prompt.

KSU time

(Display only) The menu displays KSU time. GVPH uses the Strata CTX’s clock.

Main

Menu title.

Menu Bar

System

Information

Port

Activity

Statistics

Summary of Contents for Strata CIX GVPH

























































































































































































Search results

Summary of Contents for Strata CIX GVPH

Reviews:

Toshiba Strata CIX GVPH, Programming Manual, Page: 20 / 184

Search results

Summary of Contents for Strata CIX GVPH

Reviews: