manualshive.com logo in svg

Toshiba Strata CIX GVPH, Programming Manual, Page: 84 / 184

Share
Download
Toshiba Strata CIX GVPH Programming Manual Download Page 84

Menus

Users Menu

4-18

Strata CIX40 Voice Processing Programming Manual    7/06

Info/Status Screen

Figure 4-7

Info/Status Screen with Sample Data (this screen is for display only)

Table 4-8

Info/Status Screen Fields (Display Only) 

Menu Bar

See 

“Users Menu Field Descriptions” on page 4-5

 for a definition of the fields.

User’s Information

See 

“Users Menu Field Descriptions” on page 4-5

 for a definition of the fields.

User’s Statistics

Statistics (creation, saved and connect) for the User ID mailbox. 

Box Created

Date (mm/dd/yy) and time (hh:mm) the User ID mailbox was originally created. Time is 
in military format (24-hour clock).

Box Saved

Date (mm/dd/yy) and time (hh:mm) the User ID mailbox was last updated. Time is in 
military format (24-hour clock).

Connected Secs

Number of seconds callers have been connected to the mailbox since it was created.

User Secs

Number of seconds users have been connected to the mailbox since it was created.

Message Statistics

Message statistics for the User ID mailbox.

Current

Number of messages currently stored and number of seconds for playback of these 
stored messages.

New

Number of new messages.

Maximum

Maximum number of messages stored at the same time since the mailbox was created.

Total

Number of messages stored since the mailbox was created.

User’s

Information

User’s

Statistics

Menu Bar

 Statistics

Message

Statistics/

73974

Summary of Contents for Strata CIX GVPH

























































































































































































Reviews:

No comments