Toshiba Strata CIX GVPH, Programming Manual, Page: 34 / 184

Configure UADM2 Software
System Parameters
2-12
Strata CIX40 Voice Processing Programming Manual 7/06
minmsg
Sets the threshold for keeping or discarding messages. A message recording to be
considered valid and kept must be at least as long as this setting. Shorter
recordings are discarded. In 100 ms units.
Default: 10 (1 second)
msg_log
Logs every received message and User ID that checks for messages, along with
the DTMF entered.
Note When active, grows quickly. Archive or delete frequently.
Default: ‘MSG.LOG’ (To enable, remove the starting #.)
Note Default is fixed and cannot be changed.
msg_pending_threshold
Number of seconds that a message must play before it is considered “pending.”
Possible values: 3~10 seconds
Default: 3
n_msg_scan
Threshold for message count. When a user logs onto their mailbox, if the total
number of messages (i.e., new, saved, pending, urgent) is less than the number
defined in this parameter, voice processing scans the number of messages and
reconciles the message count if an error is encountered.
Possible values: 0~99
Default: 0 (no message scan at log in time)
n_ochan
Number of dedicated ports (starting with the highest port) to reserve for outbound
notify ports. This number must not exceed the total number of available ports. When
set, the defined port does not accept incoming calls.
Important!
If the value is set to 0, GVPH attempts to use the highest numbered
IDLE port. The danger of this is that GVPH may inadvertently begin a
notification on a port with an incoming call.
Possible values: 0~24 (number of ports)
Default: 0
nam_maxlen
Maximum number of seconds for recording a User ID’s name and extension. The
name and extension recording is used for directory access and whenever voice
processing tries to identify the User ID.
Possible values: 1~99 (seconds)
Default: 5
notify_restriction
Restricts Notify to only the defined port. The port still takes incoming calls. This is
particularly useful for those switches that require message lights to be turned off by
the same port that turned them on.
Possible values: 1, 2, ..., highest port number
Default: 1 (To enable, remove the starting # and set the value.)
partial_q_ok
Enables the Q( ) token to save the message even though all prompts are not
completed.
True: Q( ) token saves the messages.
False: Messages are not saved if prompts are not completed.
Possible values: true, false
Default: false (To enable, remove the starting # and set the value.)
Parameter Description (continued)