Toshiba Strata CIX GVPH Programming Manual Download Page 63

Page: 63 / 184

How Voice Processing Operates

Feature Programming

Strata CIX40 Voice Processing Programming Manual 7/06

3-17

Ho
w V

ice

Proc

essin

Ope

rates

Messages—New, Pending and Saved

Mailbox Feature

Set

Saved Msg Que

field (Users Menu Options Screen) to Yes to create two queues, new and

saved, or No for one queue for all messages.

Pending Messages

Any message listened to for a shorter amount of time than that specified in the

msg_pending_threshold

parameter is kept as a new message. The message remains in the

New Message Queue and the Message Waiting Off notification type is not processed. A
message that is listened to longer than the time specified but is not listened to all the way
through or manually saved (by pressing

) or deleted (by pressing

) is considered a Pending

Message. The message remains in the New Message Queue and the Message Waiting Off
notification type

processed.

This feature defaults to disabled. To enable it set the

Message Pending

(Users Menu Options

screen) field to On. To reset the threshold time, use the

msg_pending_threshold

(default 5

seconds) parameter (values are 3~10 seconds).

Messages—Urgent

Mailbox Feature

Set the

Type

field (Notify Menu) to URGENT to notify the user of urgent messages.

Multiple System Languages

System-wide Feature

System Prompts: English or Spanish
System Greetings:

•

English only

•

prompt plays in English, repeats in Spanish

•

Spanish only

•

prompt plays in Spanish, repeats in English

Note

These options are set using jumpers SW2 and SW3 on the GVPH card and the

prompt_file

parameter in the Stratagy Admin UADM2 software. See Chapter 1 in

the

Strata CIX40 I&M Manual

for instructions.

Name (and Extension) Control

Mailbox Feature

This feature defaults to enabled (Yes). To disable this feature, set the

Record Name?

field

(Users Menu Options screen) to No.
The amount of recording time defaults to 5 seconds. To change the amount of recording time
reset the

nam_maxlen

parameter to 1~99 seconds.

Paging – Office

Mailbox Feature

This feature is set using the

Type

field (Notify Menu) to RELAY.

Summary of Contents for Strata CIX GVPH

























































































































































































Search results

Summary of Contents for Strata CIX GVPH

Reviews:

Toshiba Strata CIX GVPH, Programming Manual, Page: 63 / 184

Search results

Summary of Contents for Strata CIX GVPH

Reviews: