Toshiba Strata CIX GVPH, Programming Manual, Page: 61 / 184

How Voice Processing Operates
Feature Programming
Strata CIX40 Voice Processing Programming Manual 7/06
3-15
Ho
w V
o
ice
Proc
essin
g
Ope
rates
the entries is the maximum number of guest user IDs that can be created by all users on
the system.
•
User ID Limit: A limit is set (default: -1) for each User ID by entering a value in the Guests
field on the User’s Options screen. Valid entries are:
•
0~22 enables the user to create that number of guest user IDs.
•
-1 stops the User from using the Guest Users feature.
The Administrator can also change the number remaining in the field to 0 at any time. The
user has access to the previously-created Guest User IDs but cannot create new ones.
If the Administrator changes the number remaining in the field to -1 after Guest User IDs have
been created, the Guest User IDs are not deleted but the user does not have access to them.
Any new IDs cannot be created.
Message Continuous Delete/Playback
System-wide Feature
This feature defaults to 30 minutes for continuous delete or playback. To change the setting
use the
tape_length parameter (values are 10~99 minutes).
Note
The time period set is normally the length of a continuous recording.
Message Copy
Mailbox Feature
To enable this feature enter a User ID mailbox number in the Copy Message To field (Users
Menu Options screen).
Set the
Store Messages field (Users Menu Options screen) to Yes. Voice processing stores
the message in both the accessed User ID mailbox and the User ID mailbox shown in the
Copy Message To field. Any messages already stored in the originating User ID are not
copied.
Message Copy with Delete
Mailbox Feature
To enable this feature enter a User ID mailbox number in the Copy Messages To field (Users
Menu Options screen). Set the Store Messages field to No. Voice processing stores the
message only in the Copy Message To User ID Mailbox. The first User ID does not store
messages.
Message Date and Time Control
Mailbox Feature
This feature defaults to enabled (Yes) and the date/time is played automatically before the
message. To disable this feature, change the
Play Date/Time? field (Users Menu Options
screen) to No.
Message Length Control
Mailbox Feature
This feature defaults to 180 seconds. To change the feature, reset the Store Messages ( Max )
field (User Menu Options screen) to a value from 1~999 (seconds). If set to 0, messages can
have any length up to GVPH’s disk capacity.