Toshiba SATELLITE M40 Series, Maintenance Manual

Page: 80 / 283

3 Diagnostic Programs 3.2 Quick Start
6 Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual
3.
Test Result
System will automatically run and display the test result as follows:
Following is the comparison report of the two testing methods mentioned above:
1) Configuration and Running
As to the method used in Mouse test, the user is required to select test items by pressing
Space key and set the parameters artificially, (See 3.3.3 Item’s Parameters
Configuration) Then press F8 to start the test. User should configure each parameter in
advance; otherwise the default parameters would be used. Using this method, user is
allowed to select more than one test item at one time.
2) Running the current test item
As to the method adopted in CPU Speed test, user should highlight the test item and
press
Enter to start testing. And the user has to setup the parameters every time before
running the test. Using this method, only one test item would be tested at one time.