manualshive.com logo in svg

Toshiba SATELLITE M40 Series, Maintenance Manual

Share
Download
Toshiba SATELLITE M40 Series Maintenance Manual Download Page 76

3  Diagnostic Programs 

3.1 General

 

2

      

Satellite M40/M45 TECRA A4 Dynabook Vx/4  Maintenance Manual 

?

 

A CD-ROM Driver (for CD-ROM test) 

?

 

Audio Line for audio record test 

?

 

A Data CD (for CD-ROM test) 

?

 

Loop back connector of LPT  

?

 

SD, MS Card 

The following chapters describe all the test details. The test items could be selected from the 
DIAGNOSTIC TEST  menu.  

Note: 

When booting up the unit for the first time, the system will automatically select the location 
of the result log file. If a USB floppy drive is connected, and there is an unprotected floppy 
diskette with more then 50KB spare space in the drive, system will save all log files into the 
root directory the diskette; otherwise, system will save all log files in the root directory of 
RAM disk. 

 

Summary of Contents for SATELLITE M40 Series




























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands