manualshive.com logo in svg

Toshiba SATELLITE M40 Series, Maintenance Manual

Share
Download
Toshiba SATELLITE M40 Series Maintenance Manual Download Page 121

3.8 Video

 

3  Diagnostic Programs

 

Satellite M40/M45 TECRA A4 Dynabook Vx/4  Maintenance 

Manual     

47

 

 

4.

 

Text Color 

This test item  is to check whether all 16 colors foreground and all 8 colors 
background works normally in VGA text mode. 

The bit4-6 of the attribute byte of a character defines 8 background colors (black, 
blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 
foreground colors (dark gray, light blue, light green, light cyan, light red, light 
magenta, yellow, and white besides the above 8 colors).  

In the test, user is required to respond according to the instruction in the screen. 

 

5.

 

80 * 25 Text Mode 

This test item is to check whether 80*25 Text Mode works normally.  

Summary of Contents for SATELLITE M40 Series




























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands