Toshiba Satellite 110 Series User Manual Download Page 387

Page: 387 / 438

357

Video
Modes

This appendix lists the video modes supported by the display
adapter, and identifies the characteristics of each mode.

The columns of the following tables are defined as follows:

Mode is the mode number in hexadecimal, and is generally used by

programmers to specify video modes in programs.

Type identifies the display adapter that first supported the mode, and

specifies whether the mode is text or graphics.

Resolution is the measure of the screen’s dimensions in terms of hori-

zontal and vertical pixels (in graphics modes), or rows and col-
umns of characters (in text modes).

Grid is the default number of pels per character.

LCD Colors is the maximum number of simultaneous colors, or

shades of gray, that the mode can display on the built-in screen.

CRT Colors is the maximum number of simultaneous colors, or shades

of gray, that the mode can display on an external monitor.

Scan Freq hor/vert is the horizontal and vertical scanning frequency in

Hertz. This is for external monitors only.

Summary of Contents for Satellite 110 Series























































































































































































































































































































































































































































Search results

Summary of Contents for Satellite 110 Series

Reviews:

Related manuals for Satellite 110 Series

Brands by name

Popular brands

Toshiba Satellite 110 Series, User Manual

Search results

Summary of Contents for Satellite 110 Series

Reviews:

Related manuals for Satellite 110 Series

Brands by name

Popular brands